Below is a list of articles pertaining to Non Ferrous at Hatch which have been published in journals and/or conference proceedings.
Sulfuric Acid and Copper - A Balance in the Southwest USA
Authors:
K.J. King, R. J. Forzatti
Sulphur 2011, November 7 - 10, 2011
Abstract
Characterization of SO2 in Off Gas at Zimplats Smelter
Authors: G.
Erasmus, R. Picas, B. Matsetela, J. Nell, L. Mabiza
Southern African Pyrometallurgy 2011, Southern African Institute of Mining and Metallurgy (SAIMM), March 6-9, 2011
Abstract
Treatment of PGM Smelter Offgas with WSA Technology – Zimplats Smelter Project
Authors:
G. Erasmus, M. King, W. Channon, L. Mabiza, M. Lykke, M. Møllerhøj, H. Rosenberg,
Sulphuric Acid 2011, Southern African Institute of Mining and Metallurgy (SAIMM), May 16-19, 2011
Abstract
Optimisation of Current Density for an Electrowinning Process
Authors:
P. Casson, R. Fraser, T. Johnston, C. Panaou, D. Robinson
European Metallurgical Conference (EMC), June 27, 2011
Abstract
Ferredox: A biohydrometallurgical processing concept for limonitic nickel laterites
Authors:
C. du Plessis, W. Slabbert, K. Hallberg, B. Johnson
Hydrometallurgy Journal (2011)
Abstract
Magnesium Metal Production in Canada
Authors: D. Creber, B. Davis, S. Kashani- Nejad
COM Commemorative Book, Chapter D - Light Metals (Aluminum & Magnesium), October 2011
Abstract
Design of Copper-Cobalt Sulphating Roasters for Katanga Mining Limited in D.R. Congo
Authors:
K. Adham, T. Buchholz, A. Kokourine, R. Lu, J. Sarvinis, A. Tohn, S. Girouard
Copper 2010 paper presented in Hamburg, Germany this June, 2010
Abstract
GIBBS ENERGY MINIMISATION for process simulations and an example in uranium solvent extraction
Authors: S. Willis, S. Lallenec, I. Ivanova, B. Muller
ALTA 2010 Nickel-Cobalt-Copper, Uranium & Gold Conferences, Alberta, Canada, May 27, 2010
Abstract
Continuous Improvement for Fugitive Emissions Control
Authors: L. Gunnwiek, B. Ravary, P. Cowx, J. Woloshyn
International FerroAlloys Conference, Helsinki, Finland, June 6 - 9, 2010
Abstract
Development of a Dynamic Model for a Manganese Oxygen Refining (MOR) Converter
Authors:
I. Nolet, J. Nell
International FerroAlloys Conference, Helsinki, Finland, June 6 - 9, 2010
Abstract
High Power, Shielded-Arc Feni Furnace Operation – Challenges and Solutions
Authors:
C. Walker, T. Koehler, N. Voermann and B. Wasmund
INFACON XII, The Twelfth International Ferro alloys Congress , June 8, 2010. Helsinki, Finland
Abstract
Uranium Extraction History Using Pressue Leaching
Authors:
K.S. Fraser, K. Thomas
3rd International Conference on Uranium (Uranium 2010)/40th Annual Hydrometallurgy Meeting, 2010
Abstract
Analysis and Improvements of a Radiant Cooling Chamber in a Copper Smelter
Authors:
L.H. Gunnewiek, M.L. Ganem, G. Zamorano
Copper 2010 - Organized by GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik e.V , Hamburg, Germany , June 6-10, 2010
Abstract
The Ideal Zinc Refinery Flow Sheet
Authors:
R. Cooper, B. Krysa and S. Poulter
Conference of Metallurgists 2010 Lead and Zinc hosted by METSOC, Vancouver, Canada, October 4, 2010
Abstract
Extending Copper Smelting and Converting Furnace Campaign Life Through Technology
Authors:
K. McKenna, C. Newman, N. Voermann, R. Veenstra, M. King, J. Bryant
Copper 2010, Hamburg, Germany organized by GDMB Society for Mining,Metallurgy, Resource & Env. Technology, June 7, 2010
Abstract
High Intensity Cast Cooling Element Design and Fabrication Considerations
Authors:
K. McKenna, N. Voermann, R. Veenstra, C. Newman
Copper 2010, Hamburg, Germany organized by GDMB Society for Mining,Metallurgy, Resource & Env. Technology, June 7, 2010
Abstract
Investigating the Effect of Slag Bath Conditions on the Existence of Multiphase Emulsion Zones in PGM Smelting Furnaces Using Computational Fluid Dynamics
Authors:
S.N. Ritchie and J.J. Eksteen
Nickel Processing 2010, June 2010, by J.J. Eksteen (client) and accepted for publication in the Minerals Engineering Journal (MINE), September 2010
Abstract
SNNC: A New Ferro-Nickel Smelter in Korea
Authors:
L. Rodd, J.-H. Yoo, K. Y. Lim, N. Voermann, F. Stober, B. Wasmund, S. H. Lee, S.-J. Roh, J.-H. Park
The 12th International Ferro-alloys Congress, Helsinki, Finland June 6-9, 2010
Abstract
Solvent Extraction or Uranium-Impurity Transfer and Phase Separation
Authors:
M.Bellino and JMW Mackenzie
MetSoc Uranium 2010 Conference in Saskatoon, Saskatchewan, Canada, Aug 15 - 18th, 2010
Abstract
Design and Fabrication of Titanium Piping for Pressure Hydrometallurgy Service
Authors:
T. Caruana, J. Clappison and L. Nightingale Mercer, and L. Banfi
26th Annual International Titanium Association (ITA) Conference, Orlando Florida, Oct 3 -6, 2010
Abstract
Copper Oxide Agitated Leaching on the African Copperbelt, and Possible Heap Leach Application
Authors:
L. Roux, M. van Rooyen, E. Minnaar, E. Robles, I. Cronje
Copper 2010, Hamburg, Germany, June 8, 2010
Abstract
Monitoring Deterioration of Waffle Cooler Thickness at Polokwane Smelter using Ultrasonic Pulse-Echo Technique
Authors: A. Sadri, P. Gebski, H. Ghorbani, G. McGarrie and T. de Vries (Anglo Platinum Research Group)
JOM, A Publication of the Minerals, Metals & Materials Society, October 2009, Volume 61 No. 10
Abstract
Non-Destructive Testing (NDT) Techniques for Determination of Refractory Deterioration in Smelting Furnaces
Authors: P. Gebski, E. Shameli & A. Sadri
Molten 2009 - Proceedings of the VIII International Conference on Molten Slags, Flux and Salts, January 18 - 21, 2009
Abstract
Future of Rotary Kiln - Electric Furnace (RKEF) Processing of Nickel Laterites
Authors: C. Walker, S. Kashani-Nejad, A.D. Dalvi, N. Voermann, I.M. Candy and B. Wasmund
European Metallurgical Conference, EMC 2009, Innsbruck, Austria, June 2009
Abstract
New and Innovative Non-Destructive Testing (NDT) Techniques for Inspection and Monitoring of Metal Smelting Furnaces
Authors: A. Sadri, P. Gebski, K. Mirkhani and G. McGarrie
NDT in Canada 2009, Conference and the 6th International Workshop: Advances in Signal Processing for Non Destructive Evaluation of the Materials, August 25 - 27, 2009
Abstract
Stabilization of Supersonic Vent Gas From Autoclave Pressure Oxidation
Authors: M. Franceschini & J. Woloshyn
SAIMM Southern Africa Hydrometallurgy Conference, February 24, 2009
Abstract
Uranium Hydrometallurgy Circuits - An Overview
Authors: I. Ivanova, K. Fraser, K. Thomas and M. Mackenzie
ALTA 2009 Nickel-Cobalt, Copper & Uranium Conference, May 25-30 2009, Perth, W. Australia
Abstract
Solvent Extraction Design Considerations for the Tati Activox® Plant
Authors: E. Robles, Hatch, I. Cronje, Cytec Africa & G. Nel, Norilsk Africa Pty
Hydrometallurgy Conference 2009, The Southern Africa Institute of Mining and Metallurgy, February 2009
Abstract
Development of the Tati Activox BMR Ammonia Recovery Circuit
Authors: D. van den Berg, P. Mare and G. Nel, Norilsk Nickel
SAIMM Hydrometallurgy Conference 2009, Feb. 24-26, 2009
Abstract
The Future of SX Plant Design for Modern Hydrometallurgical Refineries
Authors: E. Robles, S. Poulter, R. Haywood, M. Leon & I. Cronje, Cytec Africa
Hydrocopper 2009 Conference, V International Copper Hydrometallurgy Workshop, May 2009
Abstract
Approaching Sustainable Development Through Industry Associations: A Case Study with the International Manganese Institute (IMnI)
Authors: L.A. Westfall, D. Ersenkal, M. Ali, and A. Tremblay
Sustainable Development Indicators in the Mining Industry (SDIMI), Giold Coast, Queensland, Australia July 6-8, 2009
Economical Considerations in the Analysis of Alternative Processes for the Treatment of Copper Sulphides
Author: E. Robles
Hydrocopper 2009 Conference, V International Copper Hydrometallurgy Workshop, May 2009
Abstract
Application of Safety Instrumented Systems (SIS) to Ensure Safety of Nickel/Cobalt Autoclave Plants
Authors: M. Pearson, S. Sullivan, J. Murray
Hydrometallurgy of Nickel and Cobalt 2009 , Proceedings of the 39th Annual Hydrometallurgy Meeting held in Conjunction with Nickel & Cobalt 2009, August 23, 2009
Abstract
Applications of Leaching and Precipitation Modelling in Nickel Hydrometallurgical Process Design
Author: J. Adams
COM 2009, Hydrometallurgy of Nickel and Cobalt 2009, August 23-26, 2009
Abstract
The Tati Nickel Electrowinning Plant
Authors: D.J. Robinson, R. Fraser, C. Panaou, K. Gottliebsen, M. Van Rooyan, G. Nel
Conference of Metallurgists 2009, Sudbury, August 26, 2009, Sudbury, Canada
Abstract
Mechanical Slag Losses in Laterite Smelting - Nickel
Author: M.Y. Solar
48th Conference of metallurgists - COM2009, August 23 - 26, 2009, Sudbury, Canada
Abstract
Cleaning of Copper Cliff Converter Slag
Authors: T. Utigard, T. Tan (University of Toronto), A. Wolf (Hatch), A. Vahed (Vale Inco)
COM2009, August 25, 2009, Sudbury, Canada
Abstract
Sulphur Based By Products for the Non-Ferrous Industry
Authors: M.J. King & R. J. Forzatti
COM2009, August 25, 2009, Sudbury, Canada
Abstract
An Introduction to Stress Wave Non-Destructive Testing and Evalutation (NDT&E) of Metallurgical Furnaces and Refractory Condition Monitoring
Author: A. Sadri
CINDE Journal vol. 29, no. 2, pp. 7-11, March - April 2008
Abstract
Aspects of the Design of SX Plants for the Modern Hydrometallurgical Refinery
Authors: E.Robles, I.Cronje, S.Poulter & R.Haywood
Abstract
Mixing System Design for the Tati Activox Autoclave
Authors: M.Nicolle, G.Nel, T.Plikas, U.Shah, L.Zunti, M.Belino and H.J.H.Pieterse
Development of the Taphole Acoustic Monitoring (TAM) System for Water-Cooled Copper Tapblocks
Authors: A.Sadri, P.Gebski, and D.George-Kennedy, Kennecott Utah Copper
Proceedings of the 47th Conference of Metallurgists, Winnipeg, Canada, August 2008
Abstract
Flash Vessel Process Design
Authors: L. Gunnewiek, U.Shah
6th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries, SINTEF/NTNU, Trondheim, Norway,
June 2008
Abstract
Application of Safety Instrumented Systems to Ensure Safety of Autoclave Plants
Authors: M. Pearson, S.Sullivan, Lakeside Process Controls
ISA Expo 2008
Abstract
Comparison of Solvent Extraction and Selective Precipitation for the Purification of Cobalt Electrolytes at the Luilu Refinery, DRC
Authors: L. Roux, E. Minnaar, P. Cilliers, M. Bellino and R. Dye
Southern African Institute of Mining and Metallurgy: Base Metals 2007
Abstract
Role of Operational Support in Ramp-up of the FeNi-Il Furnance at PT Antam in Pomalaa
Authors: L.R. Nelson, J.M.A. Geldenhuis, T. Miraza, T. Badrujaman, A. Taofic Hidyat, I. Jauhari, F.A. Stober,
N. Voermann, B.O. Wasmund and E.J.M. Jahnsen
Abstract
Selection of Optimum Ferronickel Grade for Smelting Nickel Laterites
Authors: M.Y. Solar, I. Candy and B. Wasmund
CIM Magazine, vol. 3, no. 2, 2008
Abstract
Adding Value to LX / SX / EW Operations by Recovering Copper from Bleen, Raffinate and Other Plant Streams
Authors: R. Dixon, R. Fester, C. Garcia, C. Contreras, F. Romero, I. Ewart
Cu2007: International Symposium on Electrowinning and Electrorefining, Incorporating the 37th Annual Hydrometallurgy Meeting
Abstract
Handling of Copper Leachate Produced after the Cease of Mining Operations
Authors: R. Dixon, Hatch Chile, C.A. Garcia, I. Ewart
Abstract
Designing for Scale Control in Hydrometallurgy
Authors: R. Cooper and W. Slabbert
Chemeca 2005, Brisbane, Australia, 2005
Abstract
Design fundamentals for hydrometallurgy pressure vessel refractory linings
Authors: A. Koning and P. Lauzon
Hydrometallurgy Conference 2009, The Southern African Institute of Mining and Metallurgy, 2009
Abstract
Quality assurance programs for fabrication of specialised vessels and exotic alloy piping
Authors: W. Bristowe, A. Hanson, M. Pearson
Abstract
Process design considerations for the fluidized bed technology applications in the nickel industry
Authors: K. Adham and C. Lee
CIM Bulletin, November/December 2004
Abstract
Mortimer Tracer Test Study into Furnace Bath Mixing Phenomena
Authors: L. Malherbe, L. Nelson, L. Andrews, K. Hara, M. Legoabe, C. Sima
Pyrometallurgy 05, Cape Town, South Africa, March 2005
Abstract
"Operational Readiness" - A Value Proposition
Authors: J. Ndlovu, J.E. Amadi-Echendu, L.R. Nelson, F. Stober
Nickel and Cobalt 2005 Challenges in Extraction and Production 44th Annual Conference of Metallurgists of CIM Calgary, Canada, 2005
Abstract
Role of Technical Innovation on Production Delivery at the Polokwane Smelter
Authors: L.R. Nelson, F. Stober, J. Ndlovu, L.P.vS. de Villiers, D. Wanblad
Nickel and Cobalt 2005 Challenges in Extraction and Production 44th Annual Conference of Metallurgists of CIM Calgary, Canada, 2005
Abstract
SPLC – A Power Supply for Smelting Furnaces
Authors: T. Gerritsen, T. Ma, M. Sedighy, J. Janzen, F.Stober, N. Voermann, J.R. Frias,C. Martinez
International Laterite Nickel Symposium, Roasting and Smelting, 2004
Abstract
Hatch Electrode Column: Latest developments
Authors: S. Southall, M. Darini, N. Voermann, F. Stober, F. McCaffrey
Abstract
Modeling of nickel laterite kiln processing - a conceptual review
Authors: S. Kashani-Nejad, I. Candy and M. Kozlowski
Nickel and Cobalt 2005 Challenges in Extraction and Production 44th Annual Conference of Metallurgists of CIM Calgary, Canada, 2005
Abstract
METSIM® as a mass balancing tool for platinum-group metal concentrators
Authors: C. Panaou, M. Bellino, and M. Greyling
International Symposium on Computational Analysis in Hydrometallurgy
Abstract
Identifying the Real Risks in New Nickel Developments
Author: C. Twigge-Molecey
China Nickel 2005
Nickel - The Impact of Technology and China
Author: C. Twigge-Molecey
COM2005, Canada, 2005
The Role of Knowledge and Technology in the Mining and Metals Industry
Author: C. Twigge-Molecey
Exposibram 2005
Multiphase Modeling in Metallurgical Plant Design
Author: L. Oshinowo
Barrick Gold - Autoclaving & Roasting of Refractory Ores
Authors: K.G. Thomas, A. Cole, R.A. Williams
SME Conference, Vancouver, Canada, Society for Mining, Metallurgy and Petroleum
Abstract
Design of Barrick Goldstrike's Two-Stage Roaster
Authors: D. Warnica, A. Cole, S. Bunk
Mineral processing plant design, practice, and control, volume 2 - SME proceedings 2002,Vancouver,BC, Canada (Society for Mining, Metallurgy and Petroleum)
Abstract
Development and Implementation of a Novel Pressure Leach Process for the Recovery of Cobalt and Copper at Chambishi, Zambia
Authors: E. Munnik, H. Singh, T. Uys, M. Bellino, J. du Plessis, K. Fraser, G.B. Harris
5th International Symposium, Hydrometallurgy 2003
Abstract
Energy Recovery in the Metal Chloride Pyrohydrolysers
Authors: K. Adham, C. Lee
Chloride Metallurgy 2002, International Conference on the Practice and Theory of Chloride/Metal Interaction, Montréal, Canada, 2002
Abstract
Pyrohydrolysis of a Calcium and Magnesium Bearing FeC12 Leach Liquor
Authors: M-C. Patoine, A. De Mori, K. Borowiec
Abstract
Influence of Environmental Regulations on the Design of Barrick Goldstrike's Roaster Off-gas Cleaning Circuit
Authors: A. Cole, F. Porretta
International Seminar "Review of the Agenda: New Initiatives in the Mining Sector", May, Chile, 2002
Abstract
Plant and Process Design Improvements to Increase the Efficiency of Nickel Reduction at QNI
Authors: R. Hobson, R. Piper
Computer Control of High Power Electric Furnaces
Authors: G. Dosa, A. Kepes, T. Ma, P. Fantin
Abstract
Design for Transients in Gas Handling Systems
Author: C. Twigge-Molecey, D. Berkley
The Minerals, Metals & Materials Society, 1991
Abstract
Improvements to Converting Furnace at the Kidd Metallurgical Copper Smelter
Authors: J. G. Lenz, M. Wallgren, P. Zuliani
Recent Developments in D.C. Furnace Design
Authors: T. Ma, J. Sarvinis, N. Voermann, B. Wasmund, J. Sanchez, O. Trifilio
35th Annual Conference of Metallurgists of the Metallurgical Society of CIM, Challenges in Process Intensification Symposium Montreal, Canada, August 1996
Abstract
Upgrading Falconbridge's No. 2 Furnace Crucible
Authors: D. Tisdale, D. Briand, R. Sriram, R. McMeekin
Abstract
Efficiency Audits Methodology and Results in the Steel Industry
Authors: K. O'Leary, A. Allaire
Abstract
Design of Smelter Gas Handling Systems for Trouble-Free Operation
Author: F. Porretta
Quality in Non-Ferrous Pyrometallurgy, Vancouver, Canada, August 1995
Abstract
Clean Plant Design 2000 and the Iron & Steel Industry
Authors: T. Cesta, W.J. Thoburn, B.O. Wasmund
Association of Iron and Steel Engineers (AISE), 1994 Spring Convention, Memphis, Tennessee, April 1994
Abstract
Application of New Technology in the Design of High-Power Electric Smelting Furnaces
Authors: K.M. Donaldson, R.C. Francki, A.G. Matyas, B.O. Wasmund
Proceedings of the International Symposium on Non-Ferrous Pyrometallurgy: Trace Metals, Furnace Practices and Energy Efficiency, Edmonton, Canada, August 1992
Abstract
Managing the Risk of Implementing New Technologies
Authors: L.C. McLean, C. Twigge-Molecey, F.M. Wheeler
36th MWSP Conference, vol 32, pp. 291, 1995
Abstract
The Modeling of Binary Ore Behavior in FAG/SAG Milling
Author: W. Stange
International Conference of Autogenous and Semi Autogenous Grinding Technology, Vancouver, October 1996
Abstract
Optimum Control of the Leeudorn Semi-Autogenous Milling Circuit
Authors: W. Stange, C. McInnes, N. Norris, L. van Niekerk, H. Williams
SAIMM Western Cape Branch, Process Control Workshop, August 1997
Abstract
Converting Furnace Integrity Project at the Kidd Metallurgical Copper Smelter
Authors: A. Majumdar, P. Zuliani, J.G.I. Lenz, A. MacRae
Abstract
Prototype Metal Tap Block Design
Authors: R. Veenstra, N. Voermann, B. Wasmund
36th Annual Conference of Metallurgists, Sudbury, Canada, August 1997
Abstract
Prediction of Heat and Fluid Flow in the Slag Phase of an Electric Arc Reduction Furnace
Authors: L.H. Gunnewiek, S. Tullis
Computational Fluid Dynamics and Heat/Mass Transfer Modeling in the Metallurgical Industry, Montreal, Canada, August 1996
Abstract
Power System Harmonics and Mitigation Techiques
Authors: M. Sultan, J. Wikston, A. Young
Abstract
Performing Accurate Power Quality Measurements
Authors: B. Boulet, P. Hacksel, J. Wikston
Proceedings of the First South African Power Quality Conference, May 1997
Abstract
Managing Power Quality
Authors: J. Wikston, P. Hacksel, L. Kadar
54th Electric Furnace Conference, Dallas, USA, December 1996
Abstract
The Measurement, Calculation and Reduction of Arc Furnace Flicker
Authors: T. Ma, R.R. Nolan, J. Wikston
Abstract
Control of Non-Ferrous Electric Arc Furnaces
Authors: B. Boulet, V. Vaculik, G. Wong
IEEE Canadian Review, Summer 1997
Abstract
The Effect of Measuring System Accuracy on Power Quality Measurements in Electrical Arc Furnaces
Authors: B. Boulet, J. Wikston, L. Kadar
IEEE Industry Applications Society Annual Meeting, New Orleans, USA, October 1997
Abstract
Real-Time Compensation of Instrument Transformer Dynamics Using Frequency-Domain Interpolation Techniques
Authors: B. Boulet, L. Kadar, J. Wikston
IEEE Instrumentation and Measurement Technology Conferece, Ottawa, Canada, May 1997
Abstract
The Effect of Current and Voltage Transformers Accuracy on Harmonic Measurements in Electric Arc Furnaces
Authors: L. Kadar, P. Hacksel, J. Wikston
IEEE Transactions, vol. 33, issue 3
Abstract
Overview of the State-of-the-Art Water Treatment Technologies
Author: R. Al-Samadi
Abstract
Development of the Proposed Milling Circuit for the Nkomati Main Concentrator Plant
Authors: A. Jardin, L. Bradford, C. McInnes, W. Stange, C. de Beer, D. David
Minerals Engineering, vol. 11, no. 12, December 1998
Abstract
The Operation and Performance of Electric Arc Furnaces
Authors: T. Ma, J. Wikston, A. Young, E. Beaud
Abstract
Design and Construction of the Noranda Converter at the Horne Smelter
Authors: M. Boisvert, G. Janneteau, J-P. Landry, D. Perron, F. McGlynn, Manuel Zamalloa, F. Porretta
Sulfide Smelting: Current & future practices, San Antonio, Texas, 1998
Abstract
Process Modelling and Intelligent System in Copper Smelter – The Concept of Future Smart Smelter
Author: X. J. Guo
5th International Copper Conference, Pyrometallurgy of Copper, Santiago, Chile, November 2003
Abstract
Copper Hydrometallurgy – Current Status, Preliminary Economics, Future Direction and Positioning versus Smelting
Authors: J. Peacey, X. J. Guo, E. Robles
Transactions of the Nonferrous Metals Society of China, vol. 14, no. 3, June 2004
Abstract
Primary Copper Production – A Survey of Operating World Copper
Authors: V. “Ram” Ramachandran, C. Diaz, T. Eltringham, C.Y. Jiang, T. Lehner, P. Mackey, C.J. Newman, A. Tarasov
5th International Copper Conference, Pyrometallurgy of Copper, Santiago, Chile, November 2003
Abstract
CFD in Autoclave Circuit Design
Authors: L. Oshinowo, L. Gunnewiek, K. Fraser
2003 International Symposium on Hydrometallurgy
Abstract
Design and Start-up of Acid Plant Tail Gas Scrubber
Authors: S. Hay, Frank Porretta, Brian Wiggins
5th International Copper Conference, Pyrometallurgy of Copper, Santiago, Chile, November 2003
Abstract
Kinetics of Carbon Monoxide Reduction of Oxidized Calcines
Author: C.J.B. Crowe
Canadian Metallurgical Quarterly, vol. 42, no. 4, pp 447-454, 2003
Abstract
New Technology and Shaft Furnace for High Quality Metallurgical Lime Production
Authors: I. Gordon, M.E. Blank, V.V. Madison, P.R. Abovian
Proceedings of Asia Steel International Conference, Jamshedpur, India, April 2003
Abstract
Minimizing Fuel Costs During Thermal Regeneration of the Hydrochloric Acid Lixiviant
Authors: K. Adham, C. Lee
Minor Elements Elimination of Copper Concentrates by Vacuum Roasting
Authors: C. Jiang, Hatch Beijing, Roumeliotis and R. Harris, McGill
5th International Copper Conference, Pyrometallurgy of Copper, Santiago, Chile, November 2003
Abstract
Recent Advances the Development of an Alternative to the Cyanidation Process: Thiosulfate Leaching and Resin in Pulp
Authors: C.A. Fleming, J. McMullen, K.G. Thomas, J.A. Wells
Minerals & Metallurgical Processing, vol. 20, no. 1, February, 2003
Abstract
Dynamics of Transient Heat Transfer Processes in Counter-Current Furnaces and Devices with Packed Layer of Burden Material
Authors: I. Gordon, V. Shvidkiy, Y. Yaroshenko
AISTech 2004: Iron & Steel Conference proceedings, vol. 1 & 2
Abstract
The Impact of Platinum Production from UG2 Ore on Ferrochrome Production in South Africa
Authors: L.A. Cramer, J. Basson and L.R.Nelson
The Journal of The South African Institute of Mining and Metallurgy, October 2004
Abstract
Insights into the Influences of Paste Additions and Levels on Soderberg Electrode Management
Authors: L.R. Nelson and F.X. Prins
Proceedings: Tenth International Ferro alloys Congress, Cape Town, South Africa, February 2004
Abstract
Integrated Furnace Controls: Implementation on a Covered-Arc (Shielded Arc) Furnace at Cerro Matoso
Authors: J. Janzen, T. Gerritsen, N. Voermann, E.R. Veloza and R.C. Delgado
Proceedings: Tenth International Ferroalloys Congress, February 2004
Abstract
Application of Multiphase Modelling to Hydromet Unit Operation Design
Authors: L. Oshinowo
Multiphase Phenomena and CFD Modeling and Simulation in Materials Processes, 2004
Abstract
The Application of CFD to the Design of Electric Furnaces
Authors: L. Gunnewiek, L. Oshinowo, T. Plikas and R. Haywood
Multiphase Phenomena and CFD Modeling and Simulation in Materials Processes, 2004
Abstract
Co-Simulation in Hydromet Process Design
Authors: L. Oshinowo and I. Fok
International Laterite Nickel Symposium, Pressue Acid Leaching, 2004
Abstract
Modelling of Turbulence in Stirred Vessels Using Large Eddy Simulation
Authors: A. Bakker and L. Oshinowo
Institution of Chemical Engineers, September 2004
Abstract
Process for Regeneration of Acid Halide Solutions (United States Patent No.: US 6,692,719 B1)
Authors: B. Wasmund and K. Adham
Abstract
Development of Alternative Techniques for Matte Level Measurements in Sulphide Smelting Furnaces
Authors: K. Geldenhuis, D. Miller, B. van Beek, J. Ndlou and K.T. Hara
The South African Institute of Mining and Metallurgy, 2004
Abstract
Increase of Efficiency and Decrease of Power Consumption in SO3 Recycling from Off-Gas of Pyrometallurgical Processes
Authors: V.Yu. Baldin, Y.M. Gordon and Yu. G. Yaroshenko
Abstract
Solvent Extraction in Southern Africa: An Update of Some Recent Hydrometallurgical Developments
Authors: K. Cole, A. Feather and P. Cole
Hydrometallurgy, vol. 78, no. 1-2, pp. 52-78, July 2005
Abstract
Application of a High-Intensity Cooling System to DC-Arc Furnace Production of Ferrocobalt at Chambishi
Authors: L.R. Nelson, R. Sullivan, P. Jacobs, E. Munnik, P. Lewarne, E. Roos, M.J.N. Uys, B. Salt, M. de Vries, K. McKenna, N. Voermann and B.O. Wasmund
10th International Ferroalloys Congress, INFACON X, Cape Town, February 2004
Abstract
The Application of Numerical Modelling to the Design of Electric Furnaces
Authors: L.H. Gunnewiek, L. Oshinowo, T. Plikas and R. Haywood
Proceedings: Tenth International Ferroalloys Congress, Cape Town, South Africa, February 2004
Abstract
The Development and Application of a HCFeMn Furnace Simulation Model for Assmang Ltd.
Authors: B.R. Broekman and K.J.R. Ford
Proceedings: Tenth International Ferroalloys Congress, Cape Town, South Africa, February 2004
Abstract
Plant Optimisation
Authors: J. Kwak, J. Leahy and K. Pery
MetPlant 2004, Perth, Australia, September 2004
Abstract
Furnace Technology for Ferro-Nickel Production – An Update
Authors: N. Voermann, T. Gerritsen, I. Candy, F. Stober and A. Matyas
The Minerals, Metals & Materials Society
Abstract
Developments in Integrated Furnace Controls to Enhance Furnace Operation and Crucible Integrity in Shielded-Arc Laterite Smelting
Authors: F. Stober, T. Gerristen, J. Janzen and A. Kepes
The Minerals, Metals & Materials Society
Abstract
